Global Positioning System Dialog

Used to interface with Global Positioning System (GPS) devices.

Opens when the Global Positioning System (GPS) icon is selected in the Geographic toolbox.

Setting	Description
Settings tab	The Settings tab specifies settings needed by the Global Positioning System interface.
Status tab	The Status tab displays a graphical representation of the GPS satellites within reception range, their sky position, and signal strength.
Position tab	The Position tab displays the position the GPS device is calculating from the signals it receives.
Track	Displays the specified cell at the geographic location within the current model. Since the location within the model can be determined only if there is a geographic coordinate system defined for the model, the tool is disabled if there is no GCS. `GPS` `TRACK` Note: This tool must be on for the Trail, Data Point at GPS Position, and the Center View at GPS Position tools to be enabled.
Trail	Places a line string along the track of the GPS device as it moves.
Data Point at GPS Position	Sends a data point to Bentley Map at the current GPS position. `GPS` `DATAPOINT`
Center View at GPS Position	Centers the active view at the current GPS position. `GPS` `CENTERVIEW`
GPS Connection Status	Indicates the status of the GPS connection. If green, Bentley Map is connected to the GPS device and has received a valid report from the device within the last 2 seconds. Red indicates no connection.